Pulse dust collector is widely used in: hardware, cement, building materials, ceramics, electronics, chemicals, footwear, casting, plastics, aluminum products, metallurgy, electric power, leather, food, machinery processing, non-ferrous metals and other industrial fields. Purification.
Because the pulse dust collector adopts the pulse cleaning method. It has the advantages of good cleaning effect, high purification efficiency, large processing air volume, long life of filter bag, small maintenance workload and safe and reliable operation. It is widely used in metallurgy, building materials, machinery, chemical industry, mining and other industrial and mining enterprises. Dedusting and purification of industrial dust.
The pulse dust collector adopts the pulse cleaning method. When working, the dusty gas enters the filter chamber from the ash hopper (or the lower open flange), and the coarser particles directly fall into the ash or ash bin. The filter bag is filtered, the dust is retained on the surface of the filter bag, and the clean gas is discharged into the atmosphere through the bag mouth to the clean air chamber. When the dust on the surface of the filter bag is continuously increased, causing the resistance of the device to rise to a set value, the time relay ( Or the differential pressure controller) output signal, the program controller starts working, and the pulse valve is opened one by one, so that the compressed air is sprayed and cleaned through the nozzle, so that the filter bag suddenly expands, and is attached to the reverse airflow. The dust on the surface of the filter bag quickly leaves the filter bag and falls into the ash hopper (or ash bin). The dust is discharged by the unloader. After all the filter bags are sprayed and cleaned, the dust collector returns to normal operation.
1. The dust removal efficiency is high, and the fine dust with the particle diameter larger than 0.3 micron can be collected, and the dust removal efficiency can reach more than 99%;
2. Flexible in use, the air volume can be from millions of cubic meters to hundreds of thousands of cubic meters per hour. It can be directly installed in small units near indoor machine tools, or it can be made into a large dust collector.
3. Simple structure, stable operation and convenient maintenance;
There are 6 specifications for pulse dust collector. Each type can be divided into standard type with ash bucket type A and open flange type (ashless bucket) type B. The structure is mainly composed of filter chamber, filter bag and net. The air chamber, the ash bucket, the ash discharge valve, the pulse blowing device, the electric control box, etc., all of the box body adopts a welded structure, and the inspection door is sealed with a foam rubber strip to ensure that the dust remover is tight and does not leak air.
