Waste wire recycling equipment is an environmentally friendly mechanical equipment used to smash waste wires, circuit wires, miscellaneous wires, communication wires, data wires, earphone wires and sort the copper and plastic in them. It is also a waste Reuse equipment. Under normal circumstances, we can use it to decompose waste wires and miscellaneous wires that we do not use to achieve effective recycling of resources. If any equipment wants to be used for a long time, regular cleaning and maintenance are indispensable. Then, what are the important parts of waste wire recycling equipment that need to be cleaned? When using waste wire recycling equipment, there are two parts that are more likely to be blocked, and these two parts are also places that we need to clean up frequently.
1. Feeding port: Feeding is the main prerequisite for the processing of waste wire recycling equipment. Without the feeding port, it is impossible to complete various operations such as the crushing and processing of waste wires and cables. Because of this, the feeding port will also be blocked when it is used. If the size of the material carried in the feeding port is too large, serious congestion will occur, resulting in a decrease in the feeding speed. Therefore, daily cleaning of the feed inlet is the basic condition to ensure the normal and efficient operation of the machine.
2. Screen: The screen is to filter particulate matter, so that the copper and plastics processed by the waste wire recycling equipment are more pure. It is precisely because of this that the screen will be extremely blocked after long-term use and work. Therefore, when using waste wire recycling equipment, we need to clean them regularly to clean up the blockage of the screen, which is conducive to the processing effect of waste wire recycling equipment.
When the waste wire recycling equipment is not cleanly sorted, one situation is because the diameter of the waste wire is small, the waste wire recycling equipment can process various circuit wires, miscellaneous wires, etc. Communication cables, data cables, earphone cables and other waste wires. If the diameter of the processed waste wire is too small, the copper-plastic separation rate of the waste wire recycling equipment will be affected, and the separation will be unclean.
Secondly, the production and commissioning of waste wire recycling equipment is not in place. It is very important to install and debug the waste wire recycling equipment before production, including the load test of the waste wire recycling equipment, which is determined on the basis of the good empty running test.
Suny Group : http://www.sunyrecycle.com/，All rights reserved。
