Copper wire granulator is a machine dedicated to ecological environment protection. Its function is to separate the copper of the scrap copper product from other plastic materials, and then use the separated copper rice again, which solves the problem of how to deal with the scrap copper product.
Maintenance of copper wire granulator:
1. Always check the bearing temperature. If the temperature is too high, check whether the lubrication and transmission parts are normal and whether the rolling distance is too tight. Find out the cause in time, take corresponding measures, and stop the inspection in serious cases.
2. Always check the tightness of the transmission belt. If the belt is too loose, it will reduce the transmission efficiency and affect the work effect. If it is too tight, it is easy to cause the bearing to heat up, increase the power consumption, and reduce the service life of the transmission belt.
3. Various transmission parts should be fastened and reliable, special tools should be used for disassembly or installation, and direct hitting with tools such as hand hammers is prohibited.
4. Don't forget to check the pneumatic components. After the copper wire granulator is started, the pneumatic components, gas paths and connections in the air circuit should be checked frequently for air leakage or damage. At the same time, it should be checked whether the air supply pressure meets the requirements, and the use of the timing belt should be checked frequently. If it is found to be too tight, too loose, beating, deviation, or serious wear, it should be adjusted, maintained or replaced in time.
Suny Group : http://www.sunyrecycle.com/，All rights reserved。
