The copper wire separator machine is a device specially developed for recycling waste Japanese wires and cables. It can smash waste wires and cables, and then dry and recycle industry standards and materials. Dry copper wire separator machine and wet copper wire separator machine.
They all use a crusher to smash the wires. The main difference between the two is the different screening equipment.
The dry copper wire separator machine uses an airflow separator to separate copper and plastic. Its characteristics are small footprint, simple equipment to use, and environmentally friendly. With the continuous upgrading of the dry-type copper wire separator machine technology, the dry-type copper wire separator machine can also separate wires that are difficult to separate such as capillary wires and miscellaneous wires, and the separation rate is also increasing.
Dry-type copper wire separator machine adopts dry-type crushing and smashing, so that raw materials such as waste cables and waste wires are crushed and crushed into non-metallic sea compounds, such as metals and plastics, and then separated by high-voltage electrostatic separators. , Such as metal and plastic. The crusher adopts a multi-machine combined structure to feed materials at one time and complete it with multiple machines.
Automatic transportation, sound insulation technology, cooling system, etc. are used to realize the separation and recycling of metal and plastic. Three sets of one dust removal device, the dust removal device is divided into three levels of dust removal: cyclone dust removal, bag dust removal and air purifier dust removal, which effectively solves the problem of dust pollution. Dry copper wire separator machine equipment has the characteristics of low noise, large output and strong innovation. The copper in the cables separated and recycled by this machine can maintain the original copper quality and recycle plastics, which can produce great economic benefits.
The wet type copper wire separator machine uses a water separator to divide copper and plastic. Compared with the dry type copper wire separator machine, the separation rate is relatively high. However, the wet type copper wire separator machine has a larger floor area and must use water during use. Some areas cannot be used due to laws and regulations. In addition, the copper selected by the water separator must be dried in time, otherwise the pipe will be oxidized and affect sales. Therefore, most of the wet copper wire separator machines also need to be equipped with a dryer. When buying a copper wire separator machine, customers should choose a copper wire separator machine that suits them according to local conditions.
Suny Group : http://www.sunyrecycle.com/，All rights reserved。
