Matters needing attention in daily maintenance and maintenance of wet wipes machine:
1. The wet wipe machine should be operated on a dry, tidy, and firm horizontal table, and keep a distance of at least 10cm from the edge of the table.
2. Before connecting the wet wipes machine with 220V (mains power), please check whether the voltage marked on the product is consistent with the local voltage.
3. Children are strictly prohibited from touching the machine without adult supervision.
4. When the wet wipes machine is not used for a long time, please unplug the power cord from the power socket to avoid bad effects caused by misoperation.
5. When moving the wet wipe machine, try to move the machine forward as much as possible, not upside down, so as to prevent the water remaining in the machine from spilling and scalding the human body.
6. When cleaning the machine, do not rinse or soak the machine directly.
7. The wet wipes machine has not been used for a long time. When using it again, please clean the inside of the machine thoroughly with hot water before using it.
8. If the machine has quality problems that you cannot solve, please contact customer service or go to the specified service station for maintenance. Please do not disassemble the machine privately to avoid the risk of electric leakage or electric shock.
9. Please do not move the body during the operation of the machine, and do not disassemble or assemble parts during operation.
10. Please do not subject this product to severe impact or drop.
11. During the production of wet wipes, please do not cover the heat dissipation holes.
12. When disassembling the machine for cleaning or maintenance, please unplug the power cord from the power socket.
13. During the operation of the machine, do not put your hands or other hard objects into the machine body, and make sure that the machine is placed on a level surface.
14. When installing the machine after cleaning or maintenance, be sure to install the mixing box, the residue box, the filter, the protective cover, the wet wipe tray and the cleaning plate in place, and the upper cover and the pressure rod must be fastened.
15. During the process of making wet wipes, please do not touch the emergency switch of the mask tray on the side. After the wipes are made, the film tray will automatically pop out without manual operation. This switch is used when there is a malfunction or maintenance, and it is necessary to manually open the wet wipe tray.
16. If the power is suddenly cut off after pressing the start button, after the power is turned on, add pure water to the water injection port until the indicator light turns red, then stop adding water, and press the start button, the machine will restart to heat the wet wipes process. If the power is off for too long, it is recommended not to use this wet wipe.
Suny Group : http://www.sunyrecycle.com/，All rights reserved。
